logo

details van de producten

Created with Pixso. Thuis Created with Pixso. Producten Created with Pixso.
De Hulp van de behouddrainage
Created with Pixso.

Improve Your Paper s Uniformity and Strength with JHWB-1319 Retention Drainage Aids

Improve Your Paper s Uniformity and Strength with JHWB-1319 Retention Drainage Aids

Merknaam: JHDA
Modelnummer: JH-1319
MOQ: 1 mt
Prijs: Consult
Betalingsvoorwaarden: L/C, T/T
Toeleveringsvermogen: 6000TONS/M
Detailinformatie
Plaats van herkomst:
China
Certificering:
ISO9001;ISO14001
Vaste inhoud:
37%-39%
Oplosbaarheid:
Oplosbaar in water
Ionisch:
kationisch
Effect:
Verbetert de retentie en afvoer van slib
PH -waarde:
3-7
Moleculair gewicht:
Hoog
Viscositeit:
< 10000
Verschijning:
Lichtgele transparante vloeistof
Opslag:
Bewaar op een koele, droge plek
Verpakking Details:
200L trommels, de trommels van 1000L IBC of Flexitank-zak
Levering vermogen:
6000TONS/M
Markeren:

JHWB-1319 paper retention aids

,

retention drainage aids for paper strength

,

paper uniformity improvement aids

Productomschrijving
JHWB-1319 Sludge Encapsulated Recycled Agent
I. Product Introduction:
The average molecular weight of JHWB-1319 is approximately three million.
Through polymer bridging and adsorption, JHWB-1319 encapsulates the fine fibers
and particulate substances in the sludge, enabling them to combine with new fibers or
pulp components and improve sludge dewatering, thus facilitating better reuse in the
production process. Improve the uniformity and strength of the finished paper.
It is widely applicable corrugated paper, boxboard paper, and kraft paper, etc.
II. Main Technical Indicators:
Appearance: light yellow transparent liquid
Solid content (%): 38.0 ± 1.0
PH: 3.0 - 7.0
Viscosity (25, cps): ≤10000
Ionic type: cation
Shelf life: 3 months
III.Usage:
1. Method of addition: Dilute with a metering pump and add continuously after the
sludge injection pump. The initial dosage is 2-3 kg/T of paper. The dosage can be
gradually adjusted according to the changes in sludge concentration and indicators.
2. Position for adding sludge: Before the slurry mixer or at the inlet of slurry pump.
3. The range of sludge addition: 10 - 50 kg per ton of paper.
IV.Packaging and storage:
Packaging: 200kg and 1000kg plastic barrel packaging;
The storage temperature is 0 - 30. Use within 3 - 5 days after opening the container.